Aluminum Test Kit for Water Quality Detection

• CAS No.: 2 Years
• Formula: Water Test Kit
• EINECS: N/a
• Classification: Physicochemical Reagent
• Grade: Br
• Specific Usage: Technical Grade, Pro Analysis
• Model NO.: 090260
• Content: Standard
• Usage: Laboratory Reagents, Analytical Reagents, Teaching Reagents
• Source: Physicochemical Reagent
• Habit Appellation: Water Test Kit
• Application: Industry, Scientific Research, Health, Environmental Protection, Agriculture
• Property: Physicochemical Reagent
• Transport Package: N/a
• Specification: 100tests/box
• Trademark: CHK
• Origin: China
• Production Capacity: 5000 Boxes/Week

Product Description

 

Product Description

 Product: 090260    Aluminum  Test Kit 

Usage:   

This product can be used in analysis of aluminum in drinking water, surface water, groundwater, wastewater, and etc..

 

 

 

 

Features of product:

 

Quick and easy

Operating in accordance with the instructions, users can complete the aluminium  test independently without specialized training. 5 minutes is enough to complete the analysis of one water sample.

 

Accurate and reliable 

Determination results with this method are in accordance with the results with the standard method. It can be used as an alternative method to the standard method.

 

Quantitative packing

The kit can be used for 50 times. It is small, light and easy to carry.

 

 

 

 How to use?

 

Aluminum Test specification

1.Fill a clean test tube with sample to the 10-mL mark.

2. Add 1mL Aluminum () Reagent to the tube, swirl to mix.

3.Add the contents of one Aluminum () Reagent to the tube, cap the tube and shake to dissolve, stand for 5 minutes.

4. Add the contents of one Aluminum () Reagent to sample and swirl to dissolve.5.       Place the tube in 1 cm above the blank of standard card, compare the color from top to bottom, the standard color level has the same color as observed from the tube shows the concentration of aluminum in the sample.

 

Notes:

1.Sample pH : 4.0-7.0, temperature: 20-40.

2.When the concentration of Fe³⁺ exceeds 0.4mg/L or the concentration of Cu²⁺ exceeds 0.05mg/L in the sample, please add 0.01 g ascorbic acid before testing.

3.In step 4, swirl slowly to avoid forming foam.

 

 

 

Packaging & Shipping

 

Package: 50 test / box

 

 

 

 

 

Our Services

 

1.R & D team to provide technical support.

2.Provide packaging, labeling OEM customization.

 

 

 

 

 

 

 

 

 

FAQ

 

Q1: When doing hardness testing of water samples ,why color keep unchanged after  adding 100ml of water ?

A1: The hardness of the water sample may belong to low hardness,it out of testing range range of reagents, lower hardness reagent is recommended to be used.

 

Q2: When doing chlorine (or ozone, total chlorine) testing of for water samples,the longer time, the deeper the color, and why?

A2: Because the containing DPD reagent may react with the air oxidation, it is proposed in strict accordance with the test instructions, to control the reaction time.

 

Q3: Why the water sample shows pink after adding DPD chlorine (or total chlorine, ozone) reagent ,and then faded to become colorless?

A3: The reason may be that the concentration of chlorine (total chlorine, ozone) in the water is too high, dilution is recommended before testing.

 

 

 

Company Information