| Customization: | Available |
|---|---|
| Classification: | Physicochemical Reagent |
| Grade: | Br |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Description
Product: 090180 Total iron Test Kit
Usage:
This product can be used in analysis of iron in drinking water, surface water, groundwater, wastewater, and etc..
Features
1.Quick and easy
Operating in accordance with the instructions, users can complete the total iron test independently without specialized training. 5 minutes is enough to complete the analysis of one water sample.
2.Accurate and reliable
Determination results with this method are in accordance with the results with the standard method. It can be used as an alternative method to the standard method.
3.Quantitative packing
The kit can be used for 50 times. It is small, light and easy to carry.
How to use?
(Total) Test Specification:
1. Fill a clean test tube with water sample to the 15-mL mark.
2. Add 1 mL Ferrum (Total) () Reagent to the tube and swirl to mix.
3. Add the contents of one Ferrum (Total) () Reagent to the tube, cap the tube and shake to dissolve, stand for 5 minutes.
4. Open the cap, place the tube in 1 cm above the blank of standard card, compare the color from top to bottom, the standard color level has the same color as observed from the tube shows the concentration of ferrum (total) in the sample.
| 1.R & D team to provide technical support. |
| 2.Provide packaging, labeling OEM customization. |
Q2: When doing ozone or other testing of for water samples,the longer time, the deeper the color, and why?
A2: Because the containing DPD reagent may react with the air oxidation, it is proposed in strict accordance with the test instructions, to control the reaction time.
Q3: Why the water sample shows pink after adding DPD ozone reagent ,and then faded to become colorless?
A3: The reason may be that the concentration of ozone in the water is too high, dilution is recommended before testing.
){kind=link}