Rapid Detection Kit Real Time for Clostridium Perfringens Fluorescent Probe Assays PCR Food Safety Testing

• Customization: Available
• Specific Usage: For Biological Purpose, For Microbiological
• Usage: Laboratory Reagents, Analytical Reagents, Diagnostic Reagents, Teaching Reagents
• Model NO.: FZ003BF2
• Sensitivity: 100 Cfu/Test
• Feature: High Efficiency
• Customized Support: OEM
• Transport Package: Carton
• Specification: 48tests/box
• Trademark: BHK
• Origin: Guangdong, China

Product Description

Product Description

Introduction

This kit is only suitable for qualitative detection of Clostridium perfringens in food and water. Principle

Detection Principle: Based on Real Time PCR technology, primers, fluorescent probes and other reagents required for the specific gene of Clostridium perfringens are used, and the sample to be tested is added to carry out the amplification reaction. During the amplification process, the fluorescent probe binds to the target gene fragment, which can be decomposed by Taq enzyme and produce a fluorescent signal. At this time, the fluorescent quantitative PCR instrument can recognize the fluorescent signal and draw the corresponding real-time amplification curve according to its intensity changes, thereby determining whether Clostridium perfringens is detected.

 

How to use?
1. Sample pretreatment 1) Preparation of sample enrichment solution template DNA: a) Sample pretreatment: Take 250 mL of the water sample to be tested and filter it. Place the filter membrane in 100 mL of Clostridium enrichment medium and culture it at 36 ±1 for 18~24 h; b) Take 1 mL of the above enrichment solution to a 1.5 mL sterile centrifuge tube, centrifuge at 6000 r/min for 5 min, and completely remove the supernatant; c) Add 30 μL of lysis solution to fully suspend the sediment at the bottom of the tube, tap the tube wall to eliminate bubbles, and heat at 99 for 10 min; d) Centrifuge at 12000 r/min for 15 min. The supernatant is the sample DNA to be tested. Keep it on ice and centrifuge it again if it is not used for a long time. 2) Preparation of template DNA of suspicious colonies: Pick suspicious colonies and fully suspend them in a sterile centrifuge tube pre-added with 30 μL of lysis solution, and then follow the above steps c) and d). 2. Sample addition and reaction 1) Take n PCR reaction tubes as required (n=1 tube of negative control + number of samples to be tested + 1 tube of positive control), take out the premix from the kit, fully melt, vortex and briefly centrifuge, add 20 μL of premix to each tube and set aside. 2) Add 5 μL of negative control, sample DNA to be tested, and positive control to the above n reaction tubes, respectively, with a total reaction volume of 25 μL. Cover the tube cap tightly, centrifuge briefly, and immediately perform PCR amplification reaction. 3) The PCR reaction system is 25 μL, take the FAM detection channel, and collect the fluorescence signal at 60°C in reaction stage 2. The specific procedure is as follows:

Reaction stage	Temperature	Time	Signal collection	Number of cycles
1	95°C	30 sec	/	1
2	95°C	5 sec	/	} 40
		60°C	40 sec

Note: Collect fluorescence signals at 60 in reaction stage 2. For multi-channel fluorescence PCR instrument, select fluorescein "FAM" as the signal collection channel, select "None" for quenching group, and select "None" for dye correction.

3. Results: In general, the test results can be directly read through the baseline and threshold automatically set by the software. If adjustments are required, they can be made according to the instrument's own conditions (such as noise, etc.) and the different fluorescence channels selected. 1) Quality control: The negative control does not show an obvious S-type amplification curve or the Ct value is greater than 35, and the positive control shows an S-type amplification curve and its Ct value is less than 30. If the positive and negative controls do not meet the above conditions at the same time, the test results are invalid and should be retested or contact product technical support.

Ct value			Result interpretation
≤35			Streptococcus faecalis positive.
35~37			Retest is recommended. If the result Ct≥37, Streptococcus faecalis is negative, otherwise it is Streptococcus faecalis positive.
≥37			Streptococcus faecalis negative.

Specification

Our service

1.Offering Sample for Testing .
2.R & D team to provide technical support.
3.Provide packaging, labeling OEM customization.

Packing & Delivery

To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.

Company Profile

 

Guangdong HuanKai Microbial Sci. & Tech. Co.,Ltd. is a national high-tech enterprise under the Guangdong Institute of Microbiology which is attached to Guangdong Academy of Sciences. Since established in 1993, HuanKai has adhered to the strategy of scientific and technological innovation and development, and has formed four product lines including microbiological testing reagents and consumables, digital laboratory instruments, physical and chemical rapid water detecting products, and high-efficiency environmentally friendly cleaning agents and disinfectant, both are with independent intellectual property rights. More than 2, 000 varieties of products are widely applied in mainland China, Hong Kong, Macao, Taiwan and Southeast Asia. Huankai has developed into an important R&D production base for domestic food and other industry.

FAQ

1. Who are we?

HuanKai are based in Guangdong, China, start from 1993,there are total about 301-500 people in HKM. HuanKai has successfully established four major product lines: microbiological testing reagents and consumables, digital laboratory instruments, rapid water testing products for physical and chemical analysis, and eco-friendly cleaning and disinfection solutions. These lines boast over 2,000 different products, each protected by independent intellectual property rights.

2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.What can you buy from us?
Microbial Detection Product,Peptone&Tryptone,Deydrated Culture Media,Granular Media,Microbial Air Sampler and so on.

4. Why should you buy from us not from other suppliers?
1.With strong R&D capacity and good scientific research conditions,over 30 years of experience 2.One of the largest physicochemical reagent and culture media manufactuer in China follow international standard 3.Stable high quality main raw material from Europe & strictly quality control

5. What services can we provide?
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,MoneyGram,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese