| Customization: | Available |
|---|---|
| Classification: | Physicochemical Reagent |
| Specific Usage: | Technical Grade |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Usage: This product can be used in analysis of copper in drinking water, surface water, groundwater, fishery water, wastewater and etc.
Features
1.Quick and easy
Operating in accordance with the instructions, users can complete the copper test independently without specialized training. 5 minutes is enough to complete the analysis of one water sample.
2.Accurate and reliable
Determination results with this method are in accordance with the results with the standard method. It can be used as an alternative method to the standard method.
3.Quantitative packing
The kit can be used for 50 times. It is small, light and easy to carry.
How to use?
Copper Test Specification
1.Fill a clean test tube with sample to the 15-mL mark.
2.Add the contents of one Copper Reagentto the tube, cap the tube and shake to dissolve, stand for 2 minutes,
3.Open the cap, place the tube in the blank of the standard card, compare the color from top to bottom, the standard color level has the same color as observed from the tube shows the concentration of copper in the sample.
Notes:
| 1. The presence of Al3+,Fe3+,Ag+ ,CN-will interfere with the determination. |
| 2. The pH must be within the range 4-7, Asjust, if necessary, with NaOH or HCl. |
Package: 50 test / box
1.R & D team to provide technical support.
2.Provide packaging, labeling OEM customization.
Q1: When doing hardness testing of water samples ,why color keep unchanged after adding 100ml of water ?
A1: The hardness of the water sample may belong to low hardness,it out of testing range range of reagents, lower hardness reagent is recommended to be used.
Q2: When doing chlorine (or ozone, total chlorine) testing of for water samples,the longer time, the deeper the color, and why?
A2: Because the containing DPD reagent may react with the air oxidation, it is proposed in strict accordance with the test instructions, to control the reaction time.
Q3: Why the water sample shows pink after adding DPD chlorine (or total chlorine, ozone) reagent ,and then faded to become colorless?
A3: The reason may be that the concentration of chlorine (total chlorine, ozone) in the water is too high, dilution is recommended before testing.
Guangdong HuanKai Microbial Sci. & Tech. Co., Ltd. is a national high-tech enterprise under the Guangdong Institute of Microbiology which is attached to Guangdong Academy of Sciences. Since established in 1993, HuanKai has adhered to the strategy of scientific and technological innovation and development, and has formed four product lines including microbiological testing reagents and consumables, digital laboratory instruments, physical and chemical rapid water detecting products, and high-efficiency environmentally friendly cleaning agents and disinfectant, both are with independent intellectual property rights. More than 2, 000 varieties of products are widely applied in mainland China, Hong Kong, Macao, Taiwan and Southeast Asia.
){kind=link}